Vanguard model 61 75hp carburetor performance parts kit (Copy)

This is a performance parts kit for you if you are starting with a model 61 vanguard (40 hp). This kit is for 5500 rpm max. It includes almost all the parts required for your full build. These kits were formulated using our flow bench results on our billet heads, our efi intake and our engine building software. We do the exact same procedure when building our own engines. You have to do all the work yourself. This is theoretical power, this has to be built by an experienced engine builder. This kit is for billet heads (we supply the heads), using our intake and 50mm throttle body . The ecu must be retuned. These kits can take a couple months to ship. Here is what the kit includes:

Model 61 vanguard stock heads stock intake cam 5500 rpm 50hp

315 cam

lash caps

pushrod kit

rods

Billet heads

billet piston set

air filter

sump stud kit

cylinder head stud kit

Valve cover spacers

Oil drain valve

oil drain hose

gasket kit

sump cover gasket

efi intake and throttle body

More info about this kit: Some info may be repeated. This kit is based on what stock model 61 heads flow from ported (180fm) . Then the intake is taken into consideration. This kit uses our intake and our 50mm throttle body. The rest of the kit has been sized and matched correctly for the proper operating rpms and power level achieved. This is simply a grouping of parts needed for a complete build. There is no savings or premium from buying all these parts separately. Basically we set this kit up the way we would build an engine ourselves at this power level using this platform. If you want the computer software generated build sheet after purchasing it let us know via email. We will send it.